• Custom solutions in mechanical engineering Mechanical engineering for automation

Automatic Destacker

The Automatic Destacker is used to dispense stacks of molds or carriers. Entirely automated, the Destacker feeds a production line from stored piles. Installed above a conveyor, piles are placed directly in the Destacker with a forklift or an automatic handling system.


The cycle begins by “filling” the Destacker with a full stack by either a forklift or an automatic handling system. The molds or carriers are then released onto a conveyor one at a time from the bottom of the stack.  For smooth and continuous operation, a new stack must be provided before the first stack is fully dispensed.


  • Smooth operation to reduce impacts when putting down a carrier or a mold
© Automacad inc.       |       240 avenue Liberté, Candiac (Québec) Canada J5R 6X1          |          Tel. : +450 632 6323 Fax. : +450 632 6335          |           Email : info@automacad.com