Precast Production System

The precast sector typically refers to the fabrication of medium  to large scale concrete elements that are cast and cured in a controlled environment such as a factory or precast yard before being transported to the construction site for installation. Unlike cast in place concrete, which is poured and cured on site, precast elements are manufactured off site using reusable molds, ensuring consistent quality, repeatable finishes, and precise dimensional control.

In traditional precast operations, elements are cast in large, stationary molds placed directly on the production floor. Concrete is delivered to the molds using overhead crane buckets, grout hoppers, or ready mix trucks. Demolding typically requires significant manual labor to open molds using tools, often assisted by lifting equipment such as overhead cranes or forklifts. Mold cleaning, preparation, and reassembly are also largely manual processes. As a result, conventional precast production is generally slow, labor intensive, and space inefficient.

A fully automated handling system manages loads of up to 40 metric tons.

Automacad has developed a fully automated precast production system capable of producing one mold every 20 seconds while achieving outstanding dimensional precision. The proprietary stackable SystemBoard technology provides vertical mold storage, reducing required floor space by up to 20× compared to traditional precast methods. A fully automated handling system manages loads of up to 40 metric tons, seamlessly transporting molds and products between the production line and the curing room.

This advanced process automates all critical stages of production, including concrete filling, advanced vibration, rebar placement, curing, demolding, and mold cleaning. In addition, robotic surface coloring and finishing can be integrated, enabling high value architectural and aesthetic applications with minimal labor input.

Retaining Wall Sleepers Production System

A Sleeper Retaining Wall is a retaining structure built from precast concrete sleepers, installed either horizontally or vertically and supported by posts, pins, or structural framing to resist lateral soil pressure.

Automacad’s advanced Retaining Wall Sleepers production line is a fully automated, high precision manufacturing solution designed to produce concrete sleepers and sleeper panels up to 8 ft long, with outstanding dimensional accuracy and surface consistency. 

A fully automatic plant can produce 80Ft²  (7.5M²)  per minute.

The system is specifically engineered to manufacture a wide range of sleeper geometries, allowing producers to vary sleeper width, thickness, with high-definition textures and colors within the same production line. Using Automacad’s proprietary SystemMold and SystemBoard technologies, the line can produce:

  • Narrow or wide sleepers
  • Thin or thick structural sleepers
  • Flat or profiled sleeper panels
  • Full height sleeper wall panels

Beyond sleeper production, the system is not limited to a single product category. The same automated line can also manufacture a variety of landscape and architectural products, including pavers, steps, and masonry or cladding panels. This versatility is particularly valuable, as many sleeper producers also supply complementary landscaping products.

Need manufacturing tailored to your products?